RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

API / mini Series API / 0x0100 Write Streaming Output

Write Streaming Resolution, Bitrate, and Orientation Settings

🚨  
1. These commands apply to streaming functions on mini series devices.
2. For clarity, the first 19 bytes are displayed as text, and the data block is displayed in JSON format.
3. No checksum verification is performed on this command data block.

Applicable Devices : mini-pro, mini-pro V3, mini v3, mini-ISO

SymbolDefinitionRemarks
Start bit<The command uses "<" as the start bit
TransmitT
ADDR0x00
SN0x00
CMD0xE0
DAT10x01
DAT20x00
DAT30x00Data block length (LSB)
DAT40x00Data block length (MSB)
CHKSUMCheck sum = ADDR + SN + CMD + DAT1 + DAT2 + DAT3 + DAT4
End bit>The command uses ">" as the end bit

Command Example (Send)

<T0000e0010049002a>{"bitrate_Select":3,"res_Select":1,"language":1,"display_mode_Select":1}

Command Example (Response)

<F0000e001003d001e>{"code":0,"deviceUuid":"0122477JPRTA69000001","msg":"成功"}

Sent Data Block Description

ParameterRequiredTypeDescription
bitrate_Select*intSelected bitrate index (0-based).
display_mode_Select*intSelected orientation index (0-based).
res_Select*intSelected resolution index (0-based).