RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

FAQ / VSP Processors / VSP 112/526 Remote Codes

VSP 112 and VSP 526 common remote command codes

VSP 112 and VSP 526 common remote command codes

Applies to

VSP 112, VSP 526

Input source commands

SourceCode
CV1<T0000720000000072>
CV2<T0000720001000073>
CV3<T0000720002000074>
S-Video<T0000720003000075>
YPbPr<T0000720004000076>
VGA<T0000720005000077>
DVI<T0000720007000079>
USB<T000072000800007A>

Image adjustment examples

ActionExample code
Set brightness to 50<T0000800032323216>
Set contrast to 50<T0000800232323218>
Set color temperature to 50<T000080043232321A>

Checksum notes

  • For brightness, 0x16 is the checksum calculated from 0x80 + 0x00 + 0x32 + 0x32 + 0x32.
  • For contrast, 0x18 is the checksum calculated from 0x80 + 0x02 + 0x32 + 0x32 + 0x32.
  • 0x32 represents decimal value 50.
  • The three 32 values represent the red, green, and blue values for the adjustment.