RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

FAQ / VSP Processors / VSP 5161/5162 RS232 Codes

VSP 5161 and VSP 5162 common RS232 control codes

VSP 5161 and VSP 5162 common RS232 control codes

Applies to

VSP 5161, VSP 5161S, VSP 5162, VSP 5162S

First channel input selection

SignalCode
CV1<T0100720001000074>
CV2<T010572000200007A>
DVI1<T010172000600007A>
VGA1<T010272000500007A>
SDI<T010472000700007E>

Example SDI workflow:

  1. Select SDI with <T010472000700007E>.
  2. Set the signal to preview for the first channel with <T00029036010000C9>.
  3. Use TAKE with <T0005903E000000D3> then <T0002902A000000BC>, or CUT with <T0002903E000000D0> then <T0003902A010000BE>.

Second channel input selection

SignalCode
CV3<T0203720001000078>
CV4<T0200720002000076>
DVI2<T020572000600007F>
VGA2<T0200720005000079>

Example CV3 workflow:

  1. Select CV3 with <T0203720001000078>.
  2. Set preview for the second channel with <T00049036010100CC>.
  3. TAKE to main output with <T0005903E000000D3> then <T0002902A000000BC>.

Additional channel examples

  • Preview DVI3 on the third channel: <T00019036010200CA>.
  • Preview DVI4 on the fourth channel: <T00039036010300CD>.
  • Preview VGA3 on the fifth channel: <T00049036010400CF>.
  • Preview VGA4 on the sixth channel: <T00059036010500D1>.

Save presets

User modeCode
1<T0002680901000074>
2<T0003680902000076>
3<T0004680903000078>
4<T000568090400007A>