RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

API / mini Series API / 0x00 Set Output Resolution

Set The Output Resolution of The Output Port

Applicable Devices : mini-pro, mini-pro V3, mini v3, mini-ISO, mini-edge SDI, mini-mx SDI, mini-max, mini-extreme ISO

SymbolDefinitionRemarks
Start bit<The command uses "<" as the start bit
TransmitT
ADDR0x00
SN0x00
CMD0x74
DAT10x00Set the output resolution; see API / REFERENCE / RESOLUTION for the resolution table
DAT20x00-0xFFOutput port, 0x00 global by default
DAT3Low byte of the resolution value
DAT4High byte of the resolution value
CHKSUMCheck sum = ADDR + SN + CMD + DAT1 + DAT2 + DAT3 + DAT4
End bit>The command uses ">" as the end bit

Command list

Query the global standard output resolutionStart bitInstruction TypeAddressSNCommandData 1Data 2Data 3Data 4ChecksumEnd bit
Set the standard output resolution<T00007400010A007F>

Application example

FunctionSend & readbackResult
Set the output resolution of output port 2 to: 1920*1080@60<T00007400010A007F>
<F00007400010A007F>Set successfully the global resolution is: 1920x1080@60