RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

General / mini Series / mini-pro v3 - Views

Views - mini-pro v3

Overview

Views allow layouts to be saved and recalled on demand. Views may be known also as presets or scenes.

Applies to

mini-pro v3

What is a View

A view is created from the current PST (preset). Views contain configuration of:

  • the layout of upto two video layers each in discrete positions with scale and crop
  • PTZ camera settings for pan, tilt, zoom and focus.

Save a View

  • To save the current layout press the "M" button on the front panel, then tap VIEWS to enter the views menu.
    • Save the curent PST/Preset to a View slot. There are 8 view slots
    • View slots/button colours:
      • Yellow : view is currently being used (PST)
      • Green : view has a saved layout (ready to use)
      • Grey : view is empty/unused

    Views cannot be deleted, they can only be overwritten. To delete a View save a black/blank PST

Recall a View

Views may be recalled to PST. Once a view is recalled, TAKE (Tbar) to transition the View to PGM live output.

  • To recall a view, press the "S" shortcut button on the front to and simply select touch the view to be recalled/loaded.

Sequencing Views

Where there are mulitple saved views it is possible automatically playback the views as a sequence

  • Press the "M" button on the front panel, then tap VIEWS to enter the views menu.
    • Set the desired duration of each view (default is 5 seconds)
    • Set Mode to AUTO

Auto sequencing will commence immediate AUTO is set, with views being loaded to the PGM and output.

Transition Effects

To set a transition effect between views, go to the EFFECT menu

  • select a transition effect from the standard options

Reference

Guide: https://youtu.be/TCsSk4OHdC4