RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

API / mini Series API / 0x22 Set Main Output Mode

Set The Main Output Mode

Applicable Devices : mini-pro, mini-pro V3, mini v3, mini-ISO, mini-edge SDI, mini-mx SDI

SymbolDefinitionRemarks
Start bit<The command uses "<" as the start bit
TransmitT
ADDR0x00
SN0x00
CMD0x76
DAT10x22Set the main output mode
DAT20x00/0x010x00: HDMI 2 Output; 0x01: HDMI 1 Output
DAT30x01/0x02/0x03PVW (preview) / PGM (main output picture) / TP (test picture)
DAT4
CHKSUMCheck sum = ADDR + SN + CMD + DAT1 + DAT2 + DAT3 + DAT4
End bit>The command uses ">" as the end bit

Command list

Set the main output modeStart bitInstruction TypeAddressSNCommandData 1Data 2Data 3Data 4ChecksumEnd bit
<T0000762200010099>

Application example

FunctionSend & readbackResult
Set the output mode of HDMI2 output port to preview<T0000762200010099>
<F0000762200010099>Set successfully