RGBlink
← Back to Support Hub
proAV

Support For Integrators & Commercial Installations

What we can help with

processor control, video routing, installation design, integration issues, and OpenAPI questions for proAV devices.

  • Commercial installations, processors, switchers, scalers, and distribution systems
  • OpenAPI control questions for proAV devices
  • System integration, deployment, and troubleshooting across installed projects

Start a support chat

Tell us your device model and what you need help with, or try a suggested question.

Support Knowledge

Select an article from the menu to view full content here.

API / mini Series API / 0x18 Set Input Signal Channel

Set the Input Signal Channel

Applicable Devices : mini-pro, mini-pro V3, mini v3, mini-ISO, mini-edge SDI, mini-mx SDI, mini-max, mini-extreme ISO

SymbolDefinitionRemarks
Start bit<The command uses "<" as the start bit
TransmitT
ADDR0x00
SN0x00
CMD0x73
DAT10x18Set input signal HDMI/SDI
DAT20-nInput source number 0x00-N.The value varies by device, e.g. mini pro N= 0x04. Refer to the device ports to determine whether switching between different sources is supported.
DAT30x00, or 0x01Input type, 0x00: HDMI; 0x01: SDI (mini max : 0x00: HDMI1/3, 0x01: HDMI2/4; mini extreme: 0x00: SDI 1/2, 0x01: SDI 2/4; Refer to the device port configuration for details.)
DAT40x00Not used
CHKSUM0x80-0x8FCheck sum = ADDR + SN + CMD + DAT1 + DAT2 + DAT3 + DAT4
End bit>The command uses ">" as the end bit

Command list

Set matrix information (with layer function)Start bitInstruction TypeAddressSNCommandData 1Data 2Data 3Data 4ChecksumEnd bit
Set input source 1 to the HDMI channel<T000073180000008B>

Application example

FunctionSend & readbackResult
Set input source 1 to the HDMI channel<T000073180000008B>
<F000073180000008B>Set successfully