VSP 516, VSP 618, and VSP 709 no output checklist

Applies to

VSP 516, VSP 618, VSP 709

Checks

• Check the output configuration of the input video.
• Check that the input channel is configured correctly. For example, if CVBS1 is used, confirm it is connected to the composite interface of the video source.
• Confirm the output cable and output connector are connected correctly.
• Confirm the target monitor or display is powered on and working.
• Make sure the processor output resolution is within the maximum resolution range of the target display.
• Confirm the ALPHA value is not set to 0.