Overview

mini-pro v3 has a video recording feature that can save video of the program/live video output external USB connected storage drive/disk

Connection

Connect a USD disk/drive to the USB-A interface labeled RECORD. USB SSD Drives up to 2TB and USB flash drive up to 64GB may be utilized. Drives/disks connected must be in either FAT32 or exFAT formats.

Recording Format

Files are saved/recorded in MP4 format with audio. The recorded video is stored in files of up to 2GB, with subsquent files again each of up to 2GB continously being saved until recording is stopped (or insufficent space.

Configuration

• Push "M" key on front panel to open MENU, tap RECORD to enter the Recording menu and view the status of the connected drive/disk.
  • Press red RECORD button to start recording the PGM (live) output.
  • Press red RECORD button to stop recording. It is important to wait for the 'Standby! The recording file is saving' prompt to clear, indicating the final recording file has been closed/completed on disk/drive.
• Before recording settings are available:
  • Configuration : to turn ON/OFF to audio recording and set video recording the quality.
  • Disk Info : to check the drive/disk information has been read by the device.
  • **Format Disk ** : format the drive/disk to FAT32 or exFAT format. Note formatting drive erasers everything on the drive/disk!

Troubleshooting

• If the drive/disl is not be recognized when connected, note that some SSD drives require more power than can be provided from mini-pro. Be sure to use dual-type USB cable to power the drive (often provided with the drive).

4.Tap Red Dot in RECORD interface to start or stop recording,and you can check recording duration and progress.

**Notes:**After stopping recording, wait for the message: "Stanby! The recording file is saving..." to disappear before unplugging the U disk.

Reference

Guide: https://youtu.be/2F9pTZbwDZE