API / Commands / Set PIP mode
Set PIP mode (mini series)
Overview
Set device PIP mode
Devices Supported
mini-iso, mini-edge SDI, mini-mx SDI
Command Structure
| Element | Attribute | Detail |
|---|---|---|
| HEAD | < | |
| TYPE | T | |
| ADDR | 0x00 | default |
| SEQN | 0x00 | default |
| CMMD | 0x75 | |
| DAT1 | 0x1E | write PIP mode |
| DAT2 | 00 | default |
| DAT3 | 00-14 | PIP_MODE_OFF = 0 |
| PIP_MODE_LEFT_TOP = 1 | ||
| PIP_MODE_RIGHT_TOP = 2 | ||
| PIP_MODE_LEFT_BOTTOM = 3 | ||
| PIP_MODE_RIGHT_BOTTOM = 4 | ||
| PIP_MODE_CENT = 5 | ||
| PIP_MODE_PBP_R = 6 | ||
| PIP_MODE_PBP_L = 7 | ||
| PIP_MODE_LEFT_MID = 8 | ||
| PIP_MODE_RIGHT_MID = 9 | ||
| PIP_MODE_SIGLE_A = 10 | ||
| PIP_MODE_SIGLE_B = 11 | ||
| PIP_MODE_ALL = 12 | ||
| PIP_MODE_BLANK = 13 | ||
| PIP_MODE_MAX = 14 | ||
| DAT4 | 00 | Unused |
| CHKS | Check sum=ADDR+SN+CMD+DAT1+DAT2+DAT3+DAT4 | |
| END | > |
Example Transmit
- Set PIP mode as SIGLE_B
| Command | HEAD | TYPE | ADDR | SEQN | CMMD | DAT1 | DAT2 | DAT3 | DAT4 | CHKS | END |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ASCII | < | T | 00 | 00 | 75 | 11 | 00 | 10 | 00 | 96 | > |
| HEX | 3C | 54 | 30 30 | 30 30 | 37 35 | 31 45 | 30 30 | 31 30 | 30 30 | 39 36 | 3E |
Command Sample
<T0000751100010087>//set PIP mode LEFT_TOP