RGBlink
← 返回支持中心
proAV

系统集成与商业项目支持

查看支持范围

如问题涉及处理器控制、视频路由、安装设计、集成问题或 proAV 设备 OpenAPI，请从这里开始。

  • 商业安装、处理器、切换器、定标器和分发系统
  • proAV 设备 OpenAPI 控制问题
  • 已落地项目中的系统集成、部署和故障排查

开始支持对话

告诉我们您的设备型号和问题，或选择一个示例问题。

支持知识

从左侧目录选择文章后，在此查看完整内容。

API / Commands / Output Audio Configuration

Output Audio Configuration

Output Audio Configuration

Overview

To configure embeded audio output of device's output module

Check input and output module's availability of embeded audio before apply this command

Device Supported

Q Series: Q16pro Gen 2

Command Structure

ElementAttributeDetail
HEAD<
TYPET
ADDR0x00default
SEQN0x00default
CMMD0xF0
DAT10x67set audio output
DAT20x00~0x09output module 1~10
DAT30x0Ddefault
DAT40x00Unused
CHKSCheck sum=ADDR+SN+CMD+DAT1+DAT2+DAT3+DAT4
END>
DATA BLOCK Hexadecimalbuffer[0]output port 1 mute switch, 0 = normal, 1=mute
buffer[1]output port 2 mute switch, 0 = normal, 1=mute
buffer[2]output port 3 mute switch, 0 = normal, 1=mute
buffer[3]output port 4 mute switch, 0 = normal, 1=mute
buffer[4]output port 1 audio sources selection:
0 = follow the input video
0x0150 correspond to audio of input port 180
buffer[5]output port 2 audio sources selection:
0 = follow the input video
0x0150 correspond to audio of input port 180
buffer[6]output port 3 audio sources selection:
0 = follow the input video
0x0150 correspond to audio of input port 180
buffer[7]output port 4 audio sources selection:
0 = follow the input video
0x0150 correspond to audio of input port 180
buffer[8]output port 1 volume, 0~100
buffer[9]output port 2 volume, 0~100
buffer[10]output port 3 volume, 0~100
buffer[11]output port 4 volume, 0~100
CHKSUMcheck sum=buffer[0]+buffer[1]+buffer[2]+buffer[3]
+buffer[4]+buffer[5]+buffer[6]+buffer[7]+buffer[8]
+buffer[9]+buffer[10]+buffer[11]

Example Transmit

  • Set output board 2 audio
CommandHEADTYPEADDRSEQNCMMDDAT1DAT2DAT3DAT4CHKSEND
ASCII<T0000F06701090061>
HEX3C5430 3030 3046 3036 3730 3130 3930 3036 313E

Command Sample

<T0000F067030D0067>\01\01\00\00\00\00\08\0F\00\00\30\88\D1 //Set output board 4 audio output: mute port 1&2, switch audio 8 to port 3, switch audio 15 to port 4, output port 1&2 volume 0, output port 3 volume 30, output port 4 volume 88 <F0000F06703090063> //feedback: set successfully

Reference

For embeded audio availability please refer to blewo table:

I/O moduleSignal Type/ModeEmbeded Audio
Quad HDMI 2.0 Input Module2k/FHDsupported
4Knot supported
Quad 3G SDI(LOOP) Input Moduleallsupported
Quad HDBaseT Input Moduleallsupported
Single IP Input Module4-picture modesupported
1-picture/8-picture/16-picture modenot supported
Dual HDMI 2.0 & Dual DP 1.2 Input Moduleallnot supported
HDMI 1.3 Output Module8 layer modesupported
16 layer modenot supported
Dual HDMI 2.0 Output moduleallnot supported